-
Learn how to setup a network database so your MyoVision data can be accessed on any computer with MyoVision installed on your office's network.
-
Last Updated: 07/06/2018
in How do I... General Settings Summary This document shows you how to configure the MyoVision software to use one ScanVision or two. Before you Begin Make sure you have the latest version of the MyoVision software. Download here: https://www.myovision.com/downloa...
-
How to add images to your interpretation reports.
-
How to adjust settings, such as button sensitivity for you sEMG, ScanVision scanners.
-
Last Updated: 06/29/2018
in Software Issues How to use the MyoVision Software with a single or dual sEMG scanners.
-
Read through this guide to find out about the differences between Normal and Balanced Results.
-
Last Updated: 06/27/2018
in Software Issues How to view the normal results and the balance between left and right side results.
-
Last Updated: 06/27/2018
in Software Issues How to change, how your Thermography results display.
-
Did you know there's a proper technique for adjusting the Power Switch on your ScanVision device? Read this article to find when and how to adjust the Power Switch on your device.
-
Last Updated: 06/14/2018
in How do I... DynaROM This guide will show you how to assemble the DynaROM belt that patients wear around their waist. Remove the belt from the plastic bag. Take the end of the belt that's cut at a diagonal and pass it up through the slot marked "1" in the image. ...