How to transfer your MyoVision system to a new computer

Summary

This document explains how to transfer your MyoVision settings and database to a new computer.

Before you Begin

  1. MyoVision is fully compatible with Windows 11
  2. If you are upgrading a current computer to Windows 11, make sure you save all your current Software information and database before installing the new operating system (See step 1 below).
    • VERY IMPORTANT!!! If you install a new operating system without backing up your data first, you will lose all information
  3. You will need a flash drive or another way to save the data externally


How to move your MyoVision system to a new computer

1. Backup the Patient Database to external storage

  • Open the MyoVision software and insert the flash drive into your computer
  • See this article for full backup instructions Backup and Restore a Patient Database
    • NOTE: Make sure you save the backup file to your flash drive and not on the computer itself

2. Write down Registration information

  • Go to Help  --> Registration
  • Write down the Primary User Information: First and Last name, Email and Registration key exactly as shown. 

Tip: Copy and paste the information in an email and send to yourself.

3. For Thermography only: Write down Calibration values 

  • Go to Setup --> Calibration --> Thermography
  • A pop up box will display the values - copy these for the new install. 

4. Save EScan email settings (only for customers need advanced EScan Setup due to using non-typical email services)

NOTE: This is only if you do not use the typical email services (ie, AOL, Comcast, GoDaddy, Hotmail, MS Live, Outlook, Verizon or Yahoo) and will need to make your own email settings. If you use a typical service, skip to the next section.

6. Upload the patient database onto the new computer or Windows 10 System

  • Open MyoVision software and plug in the flash drive that has your backup file on it
  • Click on File -->  Restore Exams
  • Choose the drive that has the backup located on it and click on the file
  • Click open and it will give you a warning prompt, click OK
  • You can verify all your patient data is moved by clicking Open Exam on the main screen

    NOTE: If you use multiple computers for MyoVision and need to set up a network database please refer to this article Configuring a Network Database in Your Office for MyoVision

7. Set up MyoVision software


If you require any assistance with the change to Windows 11 or encounter any problems please call our technical support line at 1-800-969-6961 Opt 2.