-
Created On: 04/19/2018
in Frequently Asked Questions There are two ways to display the data gathered during a thermography exam. The results can be set to either Line or Bar. This setting can be changed by clicking on the corresponding tab in the upper-right corner. Line displays the data as ...
-
Change how your Thermography exams display their results.
-
Created On: 04/19/2018
in Software Issues How to change, how your Thermography results display.
-
Created On: 04/19/2018
in Software Issues How to view the normal results and the balance between left and right side results.
-
Created On: 04/19/2018
in Hardware Issues If you just updated your software, and now your DynaVision is only displaying channels 1 and 2 (See example below), go through the troubleshooting steps listed. Unplug the lead wires and plug them back in, make sure that they are fully seated insi...
-
This article will show you how to change the primary language for your MyoVision Software.
-
Is your device broken or not functioning properly? Read this article to get it sent in for repairs!
-
Read this article to find out the proper way to recharge your wireless rechargeable devices!
-
Read through this guide to find out about the differences between Normal and Balanced Results.
-
Created On: 04/13/2018
in First Time Set Up With Feature Pack G send patients their exams directly to their cell phones. Find out how by reading this article!